Alterações no passo nº 2
Edição por Walter Galan —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Disconnect the inverter cable by pulling its connector away from the socket on the inverter board. | |
| [* icon_caution] The inverter board is a very thin and delicate circuit board that is easily broken. Use caution. | |
| [* icon_note] This connector tends to stick in its socket. It is helpful to push the connector with the tip of a spudger through the two small holes in the top of the socket while pulling the connector away from the socket. | |
| + | [* icon_caution] Make sure to grasp the inverter cabling by the black tape and not the individual wires. Pulling the wires themselves will surely damage the inverter cable. |