Ir para o conteúdo principal

Alterações no passo #6

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Pull and remove the blue liner tab located in the rear camera hole.
-[* icon_note] This will expose a ring of adhesive around the hole, which will hold the metal rear camera plate in place.
+[* black] Pull and remove the blue liner tab located in the back panel's rear camera hole.
+[* icon_note] This will expose a ring of adhesive around the hole, which will hold the rear camera plate in place.