Ir para o conteúdo principal

Alterações no passo #1

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Prepare the phone frame surface by removing all traces of adhesive.
- [* black] Use tweezers to pull adhesive chunks off. Use the opening tool to scrape residue off. You can use high concentration ( over 90%) isopropyl alcohol to help dissolve residue.
+ [* black] Use tweezers to pull adhesive chunks off. Use the opening tool to scrape residue off. You can use high concentration (over 90%) isopropyl alcohol to help dissolve residue.
[* icon_caution] Be careful not to damage the wireless charging coil when scraping around it.
[* black] If you are re-using the back panel, prepare the inner surface by removing all traces of adhesive from it.
[* icon_note] Do no attempt to remove the [https://d3nevzfk7ii3be.cloudfront.net/igi/DicuaQxHQVJP4fQM|rectangular plastic liner|new_window=true] near the bottom of the panel. Scrape off all adhesive on it.