Ir para o conteúdo principal

Alterações no passo #1

Edição por Tarun Thiruma

Edição aprovada por Tarun Thiruma

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.
+ [* icon_caution] There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.