Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #4

Edição por Andrew Optimus Goldheart

Edição aprovada de Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Hold the iPod firmly against a table or bench.
[* blackicon_note] Place your thumb and index finger over the lower corners of the display, to stop the screendisplay from opening too far when the adhesive breaks.
[* black] Rock the suction cup up and back toward the top of the iPod. Be patient, and apply firmpull with firm, constant force until the adhesive breaks and the screendisplay comes up from the rear case.
[* icon_caution] After the display begins to lift from the rear case, be careful not to lift more than about an inch—a fragile plastic frame still connects the display assembly to
the rear case.
[* blackicon_note] Place your thumb and index finger over the lower corners of the display, to stop the screendisplay from opening too far when the adhesive breaks.
[* black] Rock the suction cup up and back toward the top of the iPod. Be patient, and apply firmpull with firm, constant force until the adhesive breaks and the screendisplay comes up from the rear case.
[* icon_caution] After the display begins to lift from the rear case, be careful not to lift more than about an inch—a fragile plastic frame still connects the display assembly to
the rear case.