Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Sarah Westberg —

Edição aprovada por Sarah Westberg

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate. (***Figure 1***).
-[* red] Locate and remove the six Torx screws on the motherboard. Use the T2 Torx screwdriver to remove the Torx screws. (***Figure 2)***.
-[* icon_note] Make sure to disconnect all other connections from the camera. (***Figure 2)***.
+[* black] Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate.
+[* red] Using the T2 Torx screwdriver, remove the six Torx screws on the motherboard.
+[* icon_note] Make sure to disconnect all other connections from the camera.