Histórico do passo nº 2 do guia Blu Grand M2 Charging Port Assembly Replacement - iFixit

Alterações no passo nº 2

Edição por Joey Clemmer — 12 de out de 2020

Edição aprovada por Joey Clemmer

: Antes
: Depois
: Sem alteração

Linhas do passo

-	[* ~~red~~] Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate. (*Figure 1*).
-	[* ~~black~~] Locate and remove the six Torx screws on the motherboard. Use the T2 Torx screwdriver to remove the Torx screws. (*Figure 2)*.
+	[* black] Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate. (*Figure 1*).
+	[* red] Locate and remove the six Torx screws on the motherboard. Use the T2 Torx screwdriver to remove the Torx screws. (*Figure 2)*.
	[* icon_note] Make sure to disconnect all other connections from the camera. (*Figure 2)*.