Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Marty Rippens —

Edição aprovada por Marty Rippens

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Using a J1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.
-[* orange] Using a J000 screwdriver, remove the two 1/16" screws from the areas marked with a green circle.
+[* red] Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.
+[* orange] Using a JIS #000 screwdriver, remove the two 1/16" screws from the areas marked with an orange circle.
[* icon_note] Having the magnetic pad handy will be beneficial, as these screws are very small and easily lost.