Pular para o conteúdo principal

Alterações no passo #3

Edição por David Jalufka

Edição aprovada por David Jalufka

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Leave the booster cables on and try startingattached to both vehicles for approximately 10 minutes before attempting to start the Jeep. If If it does not start right away, wait 30 seconds and try again. Continue to try until it starts, taking short breaks in between attempts.
[* black] Leave the booster cables on and try startingattached to both vehicles for approximately 10 minutes before attempting to start the Jeep. If If it does not start right away, wait 30 seconds and try again. Continue to try until it starts, taking short breaks in between attempts.
[* black] Once the engine starts, let the Jeep run for about 5 minutes to recharge the battery.
[* black] RemoveIn reverse order, remove the booster cables now that the Jeep is running and the battery has recharged.
[* black] RemoveIn reverse order, remove the booster cables now that the Jeep is running and the battery has recharged.