Pular para o conteúdo principal

Alterações no passo #2

Edição por David Jalufka

Edição aprovada por David Jalufka

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Be careful with the booster cable clamp in order to avoid damaging your vehicle and getting electrocutedelectrocuted and NEVER allow the red and black cable clamps to touch each other.
[* icon_caution] Be careful with the booster cable clamp in order to avoid damaging your vehicle and getting electrocutedelectrocuted and NEVER allow the red and black cable clamps to touch each other.
[* black] Bring out the booster cables. You must attach the cables in '''THIS '''order to the batteries of both vehicles:
[* black] 1) Connect one red clamp to the positive battery terminal on the Jeep (it will be the red spot on the battery) (Picture 1)
[* black] 2) Connect the other red clamp to the positive battery terminal on the other truck/SUVworking vehicle (Picture 2)2).
[* black] 3) Connect one black clamp to the negative battery terminal on the other truck/SUVworking vehicle (the negative terminal will be black and next to the red, positive terminal) (Picture 2)2).
[* icon_note] 4) Clip the other black clamp to an unpainted metal nut on a brace next to the battery.Jeep's battery (Picture 3)3).
[* black] 2) Connect the other red clamp to the positive battery terminal on the other truck/SUVworking vehicle (Picture 2)2).
[* black] 3) Connect one black clamp to the negative battery terminal on the other truck/SUVworking vehicle (the negative terminal will be black and next to the red, positive terminal) (Picture 2)2).
[* icon_note] 4) Clip the other black clamp to an unpainted metal nut on a brace next to the battery.Jeep's battery (Picture 3)3).