Pular para o conteúdo principal

Alterações no passo #2

Edição por Adam Donald

Edição aprovada por Adam Donald

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Be careful with the order to avoid damaging your vehicle as well as getting electrocuted.
[*
black] Bring out the booster cables. You must attach the cables in THIS order'''THIS '''order to the batteries of both vehicles:
[* black] 1) Red clamp to the positive battery terminal on the Jeep (it will be the red spot on the battery)
[* icon_caution] Be careful with the order to avoid damaging your vehicle as well as getting electrocuted.
[*
black] Bring out the booster cables. You must attach the cables in THIS order'''THIS '''order to the batteries of both vehicles:
[* black] 1) Red clamp to the positive battery terminal on the Jeep (it will be the red spot on the battery)
[* black] 2) Red Clamp to the positive battery terminal on the other truck/SUV
[* black] 3) Black clamp to the negative battery terminal on the other truck/SUV (the negative terminal will be black and next to the red, positive terminal)
[* black] 3) Black clamp to the negative battery terminal on the other truck/SUV (the negative terminal will be black and next to the red, positive terminal)
[* black] 4) Black clamp to negative battery terminal on Jeep
[* icon_note] The positive terminal on the battery will be red so the red clamp goes to the red part of the Jeep's battery. The negative terminal on the battery should be black. The black clamp goes to the black portion on the Jeep's battery.
[* icon_caution] Be careful with the order to avoid damaging your vehicle as well as getting electrocuted.