Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #10

Edição por iRobot

Edição aprovada de iRobot

Antes
Depois
Sem alteração

Linhas de Passo

[* black] The display carries a status LED, some interconnect boards and chips that are fairly easily pried off of their adhesive.
[* black] The screen itself appears to be a single fused unit, so glass and display will need replacing together, making for a more expensive part.
[* black] You will also have to be extra careful not to separate the layers when trying to access any of the components in the display assembly. Pictured is a cracked display, and damage from separating the layers.
[* black] The components on the rear case include: upper sensor board (on a very fragile board), several antennas secured by a lot of tape (copper and otherwise), and hinges (with rubber plugs to hold cables).
[* black] Ideally the antennas won't fail, but their cables run through the hinges, which means some stress over time. The copper tape will complicate replacement.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado