Alterações no passo nº 1
Edição por Brendan Harkreader —
Edição aprovada por Brendan Harkreader
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] |
|---|---|
| + | [* icon_note] Follow the steps leading up to the actual battery removal, but do not actually remove the battery. |
| [* red] Start by locating and removing the two 3/32" screws that attach the motherboard to the battery compartment using a J00 phillips screwdriver. | |
| [* orange] Once the screws are removed, Use your fingers or a pair of tweezers to remove the clip holding the ribbon connector in place. The connector is indicated with an orange marker. | |
| [* icon_caution] Be sure not to apply excessive force on the ribbon connector, as it can break. | |
| [* yellow] Find the speaker connector, indicated by a yellow circle, and using your fingers disconnect it. |