Ir para o conteúdo principal

Alterações no passo #1

Edição por Dan Zeitlin

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Begin by removing the two (2) black 16 mm Phillips #0 screwscrews. The screwscrews can easily be identified by the two notches next to each screw. One is near the left ofbattery lock and the screwother on adjacent the WiFi cover.
[* red] Begin by removing the two (2) black 16 mm Phillips #0 screwscrews. The screwscrews can easily be identified by the two notches next to each screw. One is near the left ofbattery lock and the screwother on adjacent the WiFi cover.
[* black] Push up the bottom of the keyboard by poking your finger through the hole to the right of the yellow bios battery. You will feel slight resistance.
[* icon_caution] Be sure to not lift the keyboard too far. It is still attached to the computer with a ribbon connector.