Alterações no passo nº 3
Edição por Jari Dikes —
Edição aprovada por BenZ78
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Remove the 6 mm screws around the edges with the Phillips head screw driver. Then remove the 6mm screw holding the disc drive into place. |
|---|---|
| + | [* red] Remove the 6 mm screws around the edges with the Phillips head screw driver. Then remove the 6mm screw holding the disc drive into place. Mileage may vary: removal of two additional 6mm screws, left and right immediately above hard drive compartment, may be necessary to complete this part of the process. |
| [* orange] Sliding out the disc drive will reveal the final two 4 mm screws on the bottom of the device. |