Ir para o conteúdo principal

Alterações no passo #5

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

+[title] Lift the display slightly
[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[* black] Insert an opening pick into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.