Pular para o conteúdo principal

Alterações neste passo

Edição por Aaron

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Do not try to wedge an object between click wheel and housing you will maul the metal and plastic. First remove screws from bottom of ipod and remove the metal bezel surrounding dock connector, this will free the lock that helps hold wheel in place as well as a small amount of glue. Next I use an exacto blade #11 I believe and insert between dock connector and housing under click wheel and a small amount of pressure will release the glue that helps hold wheel in place. Take care once wheel is raised not to tear cable that attaches to main board, as well there is a small black cap with a even s