Pular para o conteúdo principal

Alterações no passo #4

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] The antenna cable connector and socket are fragile.
[*
black] Gently pull the cable or use the point of a spudger to liftpry its connector straight up off its socket on the logic board.
[* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down firmly until it snaps into place.
[* icon_caution] The antenna cable connector and socket are fragile.
[*
black] Gently pull the cable or use the point of a spudger to liftpry its connector straight up off its socket on the logic board.
[* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down firmly until it snaps into place.
[* icon_reminder] If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.