Pular para o conteúdo principal

Alterações no passo #4

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] The antenna cable connector and socket are fragile.
[* black] Gently pull the cable or useUse the point of a spudger or fine tweezers to gently pry itsthe antenna cable connector straight up off its socket on the logic board.
[* black] Gently pull the cable or useUse the point of a spudger or fine tweezers to gently pry itsthe antenna cable connector straight up off its socket on the logic board.
[* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place.
[* icon_reminder] If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão