Pular para o conteúdo principal

Alterações neste passo

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Slide out the mainboard assembly
[* icon_caution] In this step you will be pushing the logic board free from clips holding it to the frame. '''Push only where directed''' or you may damage the fragile cooling fins.
[*
black] With one handPlace a thumb at each side, push up againstend of the heatsink with your thumbs, andexhaust vent, over the whole assembly willfan screw holes. Press firmly until the logic board unclips.
[* black] Once the clips are freed,
slide the logic board out of the case.
[* icon_note] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=221965|new_window=true] out of the way so it doesn't get damaged.
[* icon_caution] In this step you will be pushing the logic board free from clips holding it to the frame. '''Push only where directed''' or you may damage the fragile cooling fins.
[*
black] With one handPlace a thumb at each side, push up againstend of the heatsink with your thumbs, andexhaust vent, over the whole assembly willfan screw holes. Press firmly until the logic board unclips.
[* black] Once the clips are freed,
slide the logic board out of the case.
[* icon_note] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=221965|new_window=true] out of the way so it doesn't get damaged.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado