Pular para o conteúdo principal

Alterações no passo #3

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Remove the factory RAM modules
[* black] Remove the rubber stabilisersTwo clips secure each RAM module in place, one on each side ofside. Using your fingers, spread the RAM modules.
[* black] Press down the spring
clips on either end ofaway from the RAM modules. The modulemodule.
[* icon_note] When released, the RAM modules
will then 'pop' out, then you can remove it.
[* black] Put the new module in
pop up at an angle to the RAM socket (firmly inserted so it's snug), then push it back into the clip until you hear a satisfying clickslight angle.
[* black] Remove the rubber stabilisersTwo clips secure each RAM module in place, one on each side ofside. Using your fingers, spread the RAM modules.
[* black] Press down the spring
clips on either end ofaway from the RAM modules. The modulemodule.
[* icon_note] When released, the RAM modules
will then 'pop' out, then you can remove it.
[* black] Put the new module in
pop up at an angle to the RAM socket (firmly inserted so it's snug), then push it back into the clip until you hear a satisfying clickslight angle.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado