Pular para o conteúdo principal

Alterações neste passo

Edição por Rod Bland

Edição aprovada por Rod Bland

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Remove mainboardlogicboard screws and slide out the assembly
[* black] Remove the 2x main board Torx T10 screws plus one other shown in the picture left. I believe one may be the power supplier connector and there are initial reports there is another screw to undo as well.
[* black] This then will allow
on the mainboard assembly to slide outlogic board.
[title] Remove mainboardlogicboard screws and slide out the assembly
[* black] Remove the 2x main board Torx T10 screws plus one other shown in the picture left. I believe one may be the power supplier connector and there are initial reports there is another screw to undo as well.
[* black] This then will allow
on the mainboard assembly to slide outlogic board.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Excluído