Ir para o conteúdo principal

Alterações no passo #4

Edição por Dominik Schnabelrauch

Edição aprovada por Dominik Schnabelrauch

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Disconnect the audio jack board ribbon cable by pulling it straight back out of the ZIF connector.
[* icon_reminder] During reassembly, orient the ribbon cable so that the side with the white stripe faces you, as shown.
+[* icon_note] At this point it is possible to open the macbook all the way and to lay it flat on a table without causing any damage to the flex cables.