Alterações no passo #2

Edição por Carsten Dahl Hjarup

Edição aprovada por Carsten Dahl Hjarup

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] To fix the issue:
[* black] 1. Use compressed air (gently) to blow into the connector to remove loose debris. Alternatively use a straw and blow directly into the connector.
[* black] 2 . clean the connector with clean water and paper towel cut in tiny strip. Dispense water gently via drop directly into the connector, and remove them again with paper towel strips
[* black] 3. let it dry, by blowing with a hair dryer onto the connector for 5 minutes. Or leave on a radiator for some time.
[* black] If charging is needed urgently, use wireless charging (S9+)
[* black] 2 . clean the connector with clean water and paper towel cut in tiny strip. Dispense water gently via drop directly into the connector, and remove them again with paper towel strips
[* black] 3. let it dry, by blowing with a hair dryer onto the connector for 5 minutes. Or leave on a radiator for some time.
[* black] If charging is needed urgently, use wireless charging (S9+)