Alterações no passo #2

Edição por Carsten Dahl Hjarup

Edição aprovada por Carsten Dahl Hjarup

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] When this system triggers, there will be displayed a message onTo fix the phone,issue:
[* black] 1. Use compressed air (gently) to blow into the connector to remove loose debris. Alternatively use a straw
and a notification. Also if charger is connectedblow directly into the connector.
[* black] 2 . clean the connector with clean water and paper towel cut in tiny strip.
[* black] 3. let
it will make an audible ding-ding sounddry, by blowing with a hair dryer onto the connector for 5 minutes.
[* black] When this system triggers, there will be displayed a message onTo fix the phone,issue:
[* black] 1. Use compressed air (gently) to blow into the connector to remove loose debris. Alternatively use a straw
and a notification. Also if charger is connectedblow directly into the connector.
[* black] 2 . clean the connector with clean water and paper towel cut in tiny strip.
[* black] 3. let
it will make an audible ding-ding sounddry, by blowing with a hair dryer onto the connector for 5 minutes.