Alterações no passo #1

Edição por Carsten Dahl Hjarup

Edição aprovada por Carsten Dahl Hjarup

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] The Phone checks for unwanted resistance on two of the pins on the usb-c charge connector on the phone. If there is water or too much moisture present in the connector, it will trigger a warning/audio beep - and disable charging.
[* black] The check is performed on charger insert, however it is suspected it happens at long intervals also without charger connected.
[* black] Salt water, or water with clorine is absolutely not good for the connector. Should it happen - DO NOT CHARGE VIA THE CONNECTOR. clean and dry it before charging. This can save the connector.
[* black] Salt water, or water with clorine is absolutely not good for the connector. Should it happen - DO NOT CHARGE VIA THE CONNECTOR. clean and dry it before charging. This can save the connector.