Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por Bekah Klemp —

Edição aprovada por Bekah Klemp

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Tightly wrap the string around the peg three times. It is recommended to not tie the string around more than three times because it may interfere with tuning. Less than three times could make it less secure.
-[* black] Next, crimp the string about 1 1/2 to 2 inches past the peg. Feed the string though the hole until the crimp is through the peg hole.
+[* black] Put the end of the string through the hole in the tuning peg, and tightly wrap the string around the peg three times. If it is wrapped more than three times, it may interfere with tuning, and less than three times could make it less secure.
+[* black] Next, turn the tuning peg until there is tension in the string. This process can be sped up by using a string winder. Then snip off the excess string with a scissors.