Alterações no passo nº 2
Edição por Ben Etherington —
Edição aprovada por Sterling Hirsh
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons). | |
| [* black] Slide the flat edge of an opening pick up the side of the Joy-Con. | |
| - | [* icon_note] Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel |
| + | [* icon_note] Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed. |