| - | [title] Disconnecting the analog stick |
|---|
| - | [* black] Remove the two screws holding in the analog stick, a 'J00' bit works great for this. |
|---|
| - | [* black] The analog stick ribbon cable is locked into place by a small black switch located on the opposite side the cable is inserted. Take a spudger and carefully flip the switch upwards, then gently remove the ribbon cable. |
|---|
| + | [* black] There is a short ZL button flex cable that tethers the midframe to the motherboard. With this in mind, ***carefully flip the midframe away from the motherboard.*** |
|---|