Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Cooper

Edição aprovada por Cooper

Antes
Depois
Sem alteração

Linhas de Passo

[title] Disconnecting the 'ZL' button
[*
* black] The plastic plate is held ontoInsert an Opening Pick between the mother board by a fragile ribbon cablebattery and the Joy-Con housing. Gently open uppry out the plate like a book. This will allow access tobattery, separating it from the connector for the 'ZL' button.
[* black] The ribbon cable is locked
tape that holds it in place by a small black plastic switch located on the opposite side that the cable is inserted. Take a spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove the plastic plate completelyplace.
[title] Disconnecting the 'ZL' button
[*
* black] The plastic plate is held ontoInsert an Opening Pick between the mother board by a fragile ribbon cablebattery and the Joy-Con housing. Gently open uppry out the plate like a book. This will allow access tobattery, separating it from the connector for the 'ZL' button.
[* black] The ribbon cable is locked
tape that holds it in place by a small black plastic switch located on the opposite side that the cable is inserted. Take a spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove the plastic plate completelyplace.