Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Kyler Saunders

Edição aprovada por Kyler Saunders

Antes
Depois
Sem alteração

Linhas de Passo

[title] Disconnecting the 'ZL' button
[* black] The plastic plate is held onto the mother board by a fragile ribbon cable. Gently open up the plate like a book. This will allow access to the connector for the 'ZL' button.
[* black] The ribbon cable is locked in place by a small black plastic switch located on the opposite side that the cable is inserted. Take a spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove the plastic plate completely.
[* black] The ribbon cable is locked in place by a small black plastic switch located on the opposite side that the cable is inserted. Take a spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove the plastic plate completely.