Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Kyler Saunders

Edição aprovada por Kyler Saunders

Antes
Depois
Sem alteração

Linhas de Passo

[title] Disconnecting the 'ZL' button
[* black] The plastic plate is held onto the mother board by a fragile ribbon cable. Gently open up the plate like a book. This will allow access to the connector for the 'ZL' button.
[* black] The ribbon cable is locked in place by a small black plastic switchswitch located on the opposite side that the cable is inserted. Take youra spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove plastic plate completely.
[* black] The ribbon cable is locked in place by a small black plastic switchswitch located on the opposite side that the cable is inserted. Take youra spudger and flip this switch upwards and then gently remove the ribbon cable this allows you to remove plastic plate completely.