Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a spudger to gently pry the battery connector straight up from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
[* icon_caution] Be extremelyvery careful as you pry up the battery connector. Ifconnector—if it doesn't come up with the spudger, try gently pulling on the cables straight up from the board to disconnect it.
[* icon_caution] Be extremelyvery careful as you pry up the battery connector. Ifconnector—if it doesn't come up with the spudger, try gently pulling on the cables straight up from the board to disconnect it.
[* icon_reminder] During reassembly, press the connector straight down into its socket on the board to reconnect the battery.