Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Taylor Dixon

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a spudger to gently pry the battery connector straight up from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
[* icon_caution] Use caution while working around the vibration motor cable that runs close toBe extremely careful as you pry up the battery connector. If it doesn't come up with the spudger, try gently pulling on the cables to disconnect it.
[* icon_reminder] During reassembly, press the connector straight down into its socket on the board to reconnect the battery.
[* icon_caution] Use caution while working around the vibration motor cable that runs close toBe extremely careful as you pry up the battery connector. If it doesn't come up with the spudger, try gently pulling on the cables to disconnect it.
[* icon_reminder] During reassembly, press the connector straight down into its socket on the board to reconnect the battery.