Alterações no passo nº 6
Edição por Tobias Isakeit —
Edição aprovada por Tobias Isakeit
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert an opening pick under the display and carefully separate the Force Touch gasket from the display. | |
| - | [* icon_caution] Make sure you get right underneath the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to |
| + | [* icon_caution] Make sure you get right underneath the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself. |
| [* black] Slide the pick around the display to separate the adhesive between the Force Touch gasket and the display. | |
| [* icon_caution] Don't insert the opening pick deeper than 1/16th of an inch (~2 mm). |