Pular para o conteúdo principal

Alterações no passo #5

Edição por Nicholas Greer

Edição aprovada por Nicholas Greer

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The main power board is located directly behind the power button, screwed into the front plate.
[* black] Disconnect all the wires from the main power board by removing the white clips from their corresponding sockets mounted on the board.
[* icon_reminder] For reference to replace wires, see labeled picture of main board.
[* [* red] LED.
[* orange] DC-in board.
[* yellow] Battery.
[* green] Crank.
[*
black] With the Philips #0 screwdriver, unscrew the four screws mounting the board to the front plate. Remove the board from the front plate.
[* icon_reminder]
Set aside screws for reassembly.
[* [* red] LED.
[* orange] DC-in board.
[* yellow] Battery.
[* green] Crank.
[*
black] With the Philips #0 screwdriver, unscrew the four screws mounting the board to the front plate. Remove the board from the front plate.
[* icon_reminder]
Set aside screws for reassembly.

Imagem 1

Versão Antiga

Nova Versão