Alterações neste passo
Edição por Marley Miller —
Edição aprovada por Marley Miller
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_caution] WARNING: |
|---|---|
| + | [* icon_caution] WARNING: During reassembly, do not over-tighten the screws. They should be just firm enough to prevent the wheel from shaking. Over-tightening could result in stripped screws. |
| [* black] Re-insert both screws. As in Step 2, use a 3/16" Allen wrench to hold one screw in place and use the second Allen wrench to tighten the screw on the other side. |