Alterações no passo nº 2
Linhas do passo
| [* black] Grab two 3/16" Allen wrenches. Insert one in each screw on the sides of the wheel. Hold one screw in place while loosening the other (counterclockwise). | |
| [* black] Once both screws are removed the wheel should be free and fall out. | |
| + | [* icon_note] One of the screws encapsulates the other. The inner screw should be 7/32" in length. During reassembly, the screws can be put back in on either side. |
| [* icon_caution] WARNING: During reassembly, do not over-tighten the screws. They should be just firm enough to prevent the wheel from shaking (no free play). Over-tightening could result in stripped screws. |