Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Ron Davis —

Edição aprovada por Ron Davis

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Place a flathead screwdriver between the belt and the brushbar.
-[* black] Use the screwdriver to pry the belt up from the brushbar.
+[* black] Turn down the squared tabs on the brushbar so that they face outward.
+[* black] Use a screwdriver to pry the belt up from the brushbar.
[* icon_caution] Be careful not to cut the belt with the screwdriver.
[* black] While holding the belt, pull the brushbar to the left and remove it from the vacuum.
-[* icon_note] Let go of the belt when it's free from the brushbar. The belt will not retract into the vacuum.
+ [* icon_note] You can let go of the belt when it's free from the brushbar. The belt will not retract into the vacuum.
+[* icon_reminder] During reassembly, insert the brushbar with the tabs facing outward, then rotate the tabs up to lock the brushbar in place.