Alterações no passo nº 5
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Repeat the previous four heating and removal steps for the upper glass panel. | |
| [* icon_reminder] During reassembly, remove leftover adhesive from the panels and the rear case. Then clean those areas with high concentration isopropyl alcohol (greater than 90%) and a lint-free cloth. This will ensure proper adhesion of the panels. | |
| - | [* icon_reminder] Reinstall the panels using a |
| + | [* icon_reminder] Reinstall the panels using a [guide|113604|pre-cut adhesive strip|new_window=true] or [product|IF317-072-1|double-sided tape|new_window=true]. |