Alterações neste passo
Edição por Jared Stine —
Edição aprovada por Jared Stine
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Set you small metal can into your work area and pour some cleaning solvent into the can. |
|---|---|
| + | [* icon_note] A recommended solvent to use can be carburetor cleaner or Gumout. Do not use WD-40 as this chemical has negative effects on bearings. |
| + | [* icon_caution] Be careful when using these harsh solvents and avoid skin or eye contact. Make sure you follow the safety procedures outlined by the solvent manufacturer as well. |