Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Jared Stine —

Edição aprovada por Jared Stine

Antes
Depois
Sem alteração

Linhas do passo

-[* black] While holding the nuts on the bottom side of the board in place with a wrench, tighten the bolts from the top side of the board with a screwdriver. Tighten bolts in a diagonal pattern until the head of the bolt sinks slightly onto the grip tape.
+[* black] While holding the nuts on the bottom side of the skateboard in place with a wrench, tighten the bolts from the top side of the skateboard with a screwdriver. Tighten bolts in a diagonal pattern until the head of the bolt sinks slightly into the grip tape.