Alterações no passo nº 2
Edição por Marty Rippens —
Edição aprovada por Marty Rippens
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the screws with the |
|---|---|
| + | [* black] Remove the screws with the Phillips #1 screwdriver located underneath the aligning cap, one on each side of the straightener. |
| [* black] Use the prying tool to remove the aligning rods after the removal of the screws. | |
| [* black] Gently separate each half of the hair straightener. | |
| - | [* icon_caution] |
| + | [* icon_caution] The spring located in the middle of this mechanism may pop out and can get lost very easily. Try to separate the two components slowly. |