Ir para o conteúdo principal

Alterações no passo #4

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Carefully slide the tip of the opening pick up and down the side of the phone, making sure not to cut deeper than 1/16" (1.5 mm).
[* icon_note] As you run the pick along the side, you will feel the tip of the pick press against the edge of the OLED panel. That is as far as the pick should go without damaging the panel.
+[* black] Once you have separated the adhesive, leave an opening pick in the side to keep the adhesive from resealing.