Ir para o conteúdo principal

Alterações no passo #1

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Sem alteração

Linhas de Passo

+[* black] Remove the two screws securing the Taptic Engine:
+ [* red] One 2.1 mm Phillips screw
+ [* orange] One 2.1 mm standoff screw
+ [* icon_note] Standoff screws are best removed using an [product|IF145-343] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.