Ir para o conteúdo principal

Alterações neste passo

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Use the point of your spudger to pry up and disconnect the other end of the antenna interconnect flex cable from its socket, using the opening pick as bracing.
+ [* icon_reminder] Reconnecting this cable can be tricky. Make it easier by using your tweezers to hold the flex cable so the connector aligns with its socket. Then, gently press down on the connector with the flat of your spudger until it clicks into place.