Ir para o conteúdo principal

Alterações neste passo

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Slide an opening pick under the antenna interconnect flex cable to hold the antenna interconnect connector down.
-[* black] Use the point of your spudger to pry up and disconnect the other end of the antenna interconnect flex cable from its socket, using the opening pick to support the cable.
- [* icon_reminder] Reconnecting this cable can be tricky. Make it easier by using your tweezers to hold the flex cable so the connector aligns with its socket. Then, gently press down on the connector with the flat of your spudger until it clicks into place.
+[* black] Slide an opening pick under the antenna interconnect flex cable so that the pick edge acts as a bracing support for the connector. [Slide an opening pick under the antenna interconnect flex cable to hold the antenna interconnect connector down.]
+[* black] Use the point of your spudger to pry up and disconnect the other end of the antenna interconnect flex cable from its socket, using the opening pick as bracing. [Use the point of your spudger to pry up and disconnect the antenna interconnect flex cable from its socket, using the opening pick to hold the socket down.]
+ [* icon_reminder] Reconnecting this cable can be tricky. Make it easier by using your tweezers to hold the flex cable so the connector aligns with its socket. Then, gently press straight down on the connector with the flat of your spudger until it clicks into place.