Alterações no passo nº 3
Edição por Queena Phung —
Edição aprovada por Queena Phung
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Remove the Philips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan. | |
| [* icon_caution] Make sure the fan is unplugged while removing the circuit board as you may get shocked. | |
| + | [* icon_note] To remove the screws, unscrew in a left-to-right fashion at an angle to make sure that the wires do not get tangled. |