Pular para o conteúdo principal

Alterações no passo #1

Edição por Markus Obdenbusch

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The Bluetooth antenna is removed by simply lifting it up off the internal frame.
[* black] Remove the Bluetooth antenna from the internal frame by pushing up on both sides of the board as close to the center post as possible.
[* icon_reminder] This may require a bit of force.
[* black] If you flip around the internal frame you could see the plastic bolt. Pressing here at the same time might make things easier.