Pular para o conteúdo principal

Alterações no passo #10

Edição por Nick Sherman

Edição aprovada por Nick Sherman

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackviolet] Check that the single input plug from the logic board to to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
[* blue] Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.
[* blackviolet] Check that the single input plug from the logic board to to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
[* blue] Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.
[* icon_note] You have successfully reconnected your display screen.

Imagem 1

Versão Antiga

Nova Versão